Fire-by-design AUTOMATED TIKI TORCH Manuel d'utilisateur télécharger pdf (Page 4)

Gas Requirements

Fuel Type – Before making gas connections ensure appliance being installed is compatible with the

available gas type. Check the label on the appliance to confirm appliance gas type requirement.

Gas Pressure – Proper input gas pressures are required for optimum appliance performance.

Gas Pressure Requirements

Electrical Requirements

Acceptable Input Voltages to Supplied 24 Volt AC Transformer

110 / 210 / 220 / 240 / 480 Volt AC

(Supplied 24 Volt AC Transformer compatible with all voltages listed above)

(Read label on supplied transformer for proper connection information)

Recommended Wire Size

12 gauge wire for all installations

Clearance from Combustibles

WARNING – FIRE RISK

Provide Adequate Clearance from Combustibles as shown below

Pressure

Natural Gas

Propane

Minimum

3.5” W.C.

8.0” W.C.

Nominal

7.0” W.C.

11.0” W.C.

Maximum

½ psi (14.0” W.C.)

WARNING

The All Weather Electronic Ignition System operates on 24 Volts AC power ONLY

DO NOT Attempt to Power using 110 Volts AC Power – Damage WILL RESULT

2 ft.

8 ft.

2 in.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Fire-by-design AUTOMATED TIKI TORCH Manuel d'utilisateur Page 4