Fire-by-design AUTOMATED TIKI TORCH Manuel d'utilisateur télécharger pdf (Page 11)

Maintenance

Prior to Each Use

1. Inspect for debris in Fire Feature – remove debris prior to use

Semi-Annually

1. Visually inspect Pilot Burner for debris/insect infestation (spider webs)

2. Visually inspect burner for debris/insect infestation

3. Clean either of the above as necessary using compressed air.

Annually

1. Visually inspect Burner for excess corrosion due to heat and moisture.

2. Turn fire feature on to ensure proper operation.

Replacement Parts

WARNING

Maintenance should be done by a qualified service technician.

The appliance should be inspected before use and at least annually by a qualified service technician.

WARNING

Ensure gas and power are shut off and appliance is cool before servicing.

WARNING

Any guard or protective device removed for servicing must be replaced prior to operation.

Item Letter

Part Name

Part #

Wind Cap

Burner

Thermal Sensor

TTS

Hot Surface Igniter

HSI

Gas Valve

TGV

FBD Controller

FBDC

1 2 ... 6 7 8 9 10 11 12

Pas de commentaire

Fire-by-design AUTOMATED TIKI TORCH Manuel d'utilisateur Page 11